Blog

  • 3 min read

A renovation with Rubio Monocoat Oil Plus 2C is a simple process that brings the surface back to life without requiring major sanding.

The renovation process is recommended if you need to re-introduce the original applied color. This is typically caused by not maintaining the surface properly or in the case of an accident.

  • 4 min read
  • 4 min read

Quite simply: a wood surface that is finished with Rubio Monocoat’s hardwax oil can last indefinitely when cared for properly.

But what does “cared for properly” mean?

  • 2 min read
Cerusing, or liming, is a wood finishing technique that creates a two-toned look, where the open grain of the wood is accentuated against a contrasting base color.
  • 4 min read
Weexplain the process of stripping, preparing/sanding, and refinishing a wood furniture project with Oil Plus 2C to achieve a beautiful, natural, hand-rubbed wood finish.
How does a polyurethane wood finish compare to a hardwax oil wood finishing product? As we compare the differences, the following topics will be covered: Film Build & Aesthetic, Appearance, Colors, VOC Levels, Number of Coats Required, Protection, Repairability, Cleaning and Maintenance.
  • 7 min read
In 2018, we took our commitment to the next level by adding the Eurofins Indoor Air Comfort Gold label to our certificates. This label guarantees you, our customer, that our products will continue to meet the high standard you expect of them regarding emissions for years to come.
  • 1 min read
Hardwax oil wood finishes are typically manufactured from a mix of one or more vegetable oils and one or more waxes; the formulation may also contain a range of additional chemicals.
Originally created in 1950, the low table rod base (LTRs) were made using a revolutionary mass-production technique, discovered by the Eames, for simultaneously welding wire rods.
  • 3 min read
  • 2 min read
  • 1 min read
Faith Jablonski recently found out that she has an aggressive form of bone cancer. In response, the Instagram woodworking community has rallied around her with countless posts and prayers. The whole class got behind the cause and created these pieces with Faith in mind.
  • 2 min read
PJ used Rubio Monocoat primarily because of the one coat technology.  With so many projects going on and countless contractors to coordinate, it is invaluable for PJ to be able to knock out the whole staining process in one day.  As PJ himself put it, “There is no two, three coat application.  We save ourselves two or three days in the process.”
  • 2 min read

Search

Commonly searched