Free Shipping to the Contiguous U.S.

SKU: HWPAG/20ML

Hybrid Wood Protector

Colors and protects wood in one single layer

$799 USD

View all 22 color options

Hybrid Wood Protector is a great product that has been around for over 10 years! Technology has advanced and we are proud to now offer DuroGrit, based on a new Patented FibreGrit Technology.

Shipping and Delivery

Free Shipping to the Contiguous U.S.

Most orders placed by 12pm CST ship same day

Good to know

Pure is non-pigmented and lacks UV stabilizers. As a result, it will not provide the same level of color stability against natural aging of wood as our color options..

When applied to horizontal surfaces, mix in 10% Oil Plus Part B, prior to application.

Pure is non-pigmented. Natural is pigmented with yellow/white tones.

How much will you need?

Please note: Calculations are estimates. Your results may vary based on species, water popping, sanding, etc...

Enter the square feet you need to cover:

Description

Hybrid Wood Protector is a genuine ‘monocoat’, suitable for coloring and protecting exterior wood in 1 single layer. The exterior oil finish protects wooden decks, patios, façades, doors, shutters, carports, garden furniture, gazebos, pergolas, etc. from discoloration and weathering. The easy application and maintenance makes this oil an exceptionally user-friendly product.

  • Based on RMC technology using integrated UV* stabilizer.
  • 0% VOC, does not contain any water or solvents.
  • Suitable for almost all types of wood, can also be used for interior applications!
  • Available in 22 colors.
  • Easy to apply. Fast-drying.
  • Economical: minimum consumption.
  • Not film-forming. Does not peel or flake off.
  • Maintenance with the same product. No need for sanding!

 

Specifications

  • Spread Rate
    250-300 ft²/L
  • Spread Rate by Packaging
    20 ml covers 1-5 F² (.1-.5 m²)
    100 ml covers 15-30 F² (15-30 m²)
    1 Liter covers 150-300 F² (15-30 m²)
  • Cure Time
    7 days
  • VOC Content
    0%
  • Color Options
    22
  • Dilutable
    No
  • Shelf Life
    36 months
  • Warning
    Do not allow to freeze
  • Combustion warning
    Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal.

Certifications

Hybrid Wood Protector has achieved the following certifications:

Downloads

Instructions

An overview of instructions. Please consult the TDS for complete product information.

Application

Garden furniture, windows, doors, vertical surfaces and other wooden exterior objects

  1. Dampen the surface with water. Use a garden hose, but avoid a pressure washer, as pressure washing may cause surface damage with improper use. If the wood surface has been treated with a finish other than Hybrid Wood Protector, the previous finish must be removed before applying Hybrid Wood Protector. Ensure that any previous finish is removed by starting with a low grit and working up in consecutive grits (e.g... 40, 80,100,120).
  2. Apply undiluted Exterior Wood Cleaner. Always use protective gloves, glasses, or a face-shield.
  3. Scrub the treated area with a stiff bristle nylon brush in the lengthwise direction of the wood until it is clean. In case of stubborn residue, repeat the treatment with Exterior Wood Cleaner. Keep the surface wet with the cleaning solution for 10-15 minutes.
  4. Rinse thoroughly with water until all the foam and dirt residue has disappeared, and let the surface completely dry.
  5. Stir the Hybrid Wood Protector thoroughly until a consistent mixture is obtained. Carefully add 10% Rubio Monocoat Accelerator (Part B) to the oil. Pot life is 4-6 hours. Only mix what you can use up within that time frame. For vertical surfaces, Accelerator (Part B) is not required.
  6. Apply a layer of Hybrid Wood Protector with a firm bristle paint brush.
  7. Leave the oil to react for 10 minutes. Then smooth the surface again with the same brush (without applying new product).
  8. After 5 minutes, gently wipe off the surface with a lint free cloth to remove traces of excess oil until it appears even.
  9. Let dry for about 24 hours. Complete curing takes place after 7 days.

Wood decking

  1. Dampen the surface with water. Use a garden hose but never a pressure washer. Pressure washing may cause surface damage with improper use. If the wood surface has been treated with a finish other than Hybrid Wood Protector, the previous finish must be removed before applying Hybrid Wood Protector. Ensure that any previous finish is completely removed by starting with a low grit and work up in consecutive grits (e.g... 40, 60, 80 max).
  2. Apply undiluted Exterior Wood Cleaner. Always use protective gloves, glasses, or a face-shield.
  3. Scrub the treated area with a stiff bristle nylon brush in the lengthwise direction of the wood until it is clean. In case of stubborn residue, repeat the treatment with Exterior Wood Cleaner. Keep the surface wet with the cleaning solution for 10-15 minutes.
  4. Rinse thoroughly with water until all the foam and dirt residue has disappeared, and let the surface completely dry.
  5. Stir the Hybrid Wood Protector thoroughly until a consistent mixture is obtained. Carefully add 10% Rubio Monocoat Accelerator (Part B) to the oil. Pot life is 4-6 hours. Only mix what you can use up within that time frame.
  6. Apply Hybrid Wood Protector to 3-4 deck boards at a time. Use a firm bristle paint brush, and spread the oil in the direction of the wood. A buffer outfitted with a thick red buffer pad may also be used.
  7. Leave the oil to react for 10 minutes. Then smooth the surface again with the same brush (without applying new product).
  8. After 5 minutes, wipe the surface with a lint-free cloth to remove excess oil until the finish looks even (or use a thick white buffer pad when using a buffer).
  9. Let dry for about 24 hours. Complete curing takes place after 7 days.

Maintenance

When the finished wood shows weathering, a maintenance application of Hybrid Wood Protector in the original applied color is required. The surface needs to be cleaned and prepared correctly before using a maintenance application of Hybrid Wood Protector.

Horizontal surfaces such as decking and furniture

For decking, steps, and tables/chairs, a maintenance coat of Hybrid Wood Protector is generally needed annually after the initial application. The maintenance coat should be applied before the weather becomes unsuitable (even if it has been less than one year since the initial application).

Follow the maintenance steps outlined below.

Vertical surfaces such as siding and shutters

A maintenance coat of Hybrid Wood Protector on vertical exposures is required less frequently. The severity of exposure determines the necessary frequency of a maintenance coat application. A Southern/Western exposure typically needs a maintenance application sooner than on Northern/Eastern exposure. Expect a maintenance coat on the most weather-exposed sides within 2-3 years. Follow the maintenance steps outlined below.

  1. Clean the wood surface thoroughly with Exterior Wood Cleaner. For lightly weathered surfaces, dilute 1-part cleaner with 2-parts clean water. For medium to heavily weathered surfaces, dilute 1-part cleaner to 1-part clean water.
  2. See our recommended application instructions for horizontal or vertical surfaces above.

One order. One tree.

For every order, Rubio Monocoat USA will plant a tree at a U.S. planting site. Partner with us and plant an additional verified tree.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Meta Pay
  • Google Pay
  • Mastercard
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Frequently Asked Questions

Can I use Hybrid Wood Protector for interior purposes?

Yes, but only on vertical surfaces and furniture. We recommend Oil Plus 2C for interior wood floors.

What is the ideal temperature to apply Hybrid Wood Protector?

Between 60-70 degrees Fahrenheit is optimal.

Is Part B accelerator required for Hybrid Wood Protector?

Up to 10% Part B accelerator should be added to Hybrid Wood Protector for all horizontal surfaces.

DuroGrit color fan being held by a man at an ourdoor table

Tomorrow's UV protection for your exterior wood

NEW: DuroGrit

DuroGrit is a sustainable, wood-fiber fortified and water-soluble oil that colors and protects all exterior wood in 1 single layer.

Reviews

Rubio Monocoat Hybrid Wood Protector 1 Liter

Hybrid Wood Protector

From $799 USD
Hybrid Wood Protector is a genuine ‘monocoat’, suitable for coloring and protecting exterior wood in 1 single layer. The exterior oil finish protects wooden decks, patios, façades, doors, shutters, carports, garden furniture, gazebos, pergolas, etc. from discoloration and weathering. The easy application and maintenance makes this oil an exceptionally user-friendly product. Based on RMC technology using integrated UV* stabilizer. 0% VOC, does not contain any water or solvents. Suitable for almost all types...

Size

  • 20 ML
  • 100 ML
  • 1 Liter
  • 2.5 Liter

Color

Type

Exterior

Spread Rate

250-300 ft²/L

Cure Time

7 days

Dry Time

N/A

VOC Content

0%

Color Options

22

Dilutable

No

Shelf Life

36 months

Warning

Do not allow to freeze

Combustion warning

Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal.
View product