Be sure to select the correct size or color before adding to cart
Summarized specifications, please read TDS before using product.
Spread Rate: | 300-500 ft²/L |
Cure Time: | Within 5 days |
VOC Content: | 0% |
Color Options: | 55 |
Dilutable: | No |
Shelf Life: | 36 months |
Warning: | Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal. |
Helpful links and documents to learn about the product.
Very easy to work with and created a finish equal to or better than any finish product I used in the past. A little goes a LONG way—don’t mix too much at a time!
I like the product but the guidance for sanding is no applicable to all species. I use alder a lot for furniture. While technically classified as a hardwood, it’s density is significantly less than, for example, oak, ash or hard maple. If you sand alder to the recommended grit, the resulting appearance is extremely rough. I found the best results are to sand to 220 (water popping between grits) then water pop after 220 without sanding. The wood absorbs the finish just fine and leaves a much more attractive finish. My conclusion is that softer wood needs sanding to a higher grit to get satisfactory results.
I used the black precolor easy, cotton white oil plus part A, and the part B accelerator to make a beautiful ceruse finish guitar. I was very happy with ease of application and the finished product.
Absolutely incredible. I watched a few YT videos and read the RMC guidelines on their website prior to my first application. Then, I proceeded to apply it on a test piece. A few projects later and it quickly displaced all other top coats from my shop. RMC has now become, by far, my favorite top coat of choice. It provides excellent protection, beautiful visual appeal, and the ease of application and maintenance is unparalleled. I slowly tried the 20 ml bottles until I determined my favorite colors and stock several 100 ml bottles of those.